本文已被:浏览 272次 下载 271次
中文摘要: 用超音速火焰喷涂技术在 10Cr9Mo1VNb 耐热钢基体上制备了 NiCr-Cr3C2 耐冲蚀金属陶瓷涂层, 620℃下
用 Fe2O3 颗粒分别以 210 m/s 和 300 m/s 的速度对基体和涂层进行冲蚀实验; 利用金相显微镜、 显微硬度计、 扫
描电子显微镜、 激光显微系统研究了涂层的金相组织、 硬度、 冲蚀形貌及元素分布; 通过质量冲蚀率表征冲蚀
结果。 结果表明: 涂层组织致密, 碳化物颗粒分布均匀; 硬度范围在 760 HV~930 HV 之间。 210 m/s 冲蚀速度
下, NiCr-Cr3C2 涂层的冲蚀率仅为 0.1292%, 约为基体冲蚀的 1/6 ; 300 m/s 冲蚀速度 NiCr-Cr3C2 涂层冲蚀率为
3.3165%, 约为耐热钢基体冲蚀率的 1/2。 涂层表现出脆性材料和韧性材料混合冲蚀机制, 基体材料表现为典型
的韧性材料冲蚀机制。 采用超音速火焰喷涂工艺制备的 NiCr-Cr3C2 涂层表现出优异的防固体颗粒冲蚀性能。
Abstract:NiCr-Cr3C2 erosion resistant cermet coating was prepared on 10Cr9Mo1VNb heat resistant steel
substrate by high velocity oxygen-fuel (HVOF) technology. The erosion experiments were carried out at 620 ℃
with Fe2O3 particles at 210 m/s and 300 m/s, respectively. The microstructure, hardness, erosion morphology and
element distribution of the coating were studied by metallographic microscope, microhardness tester, scanning
electron microscope and laser microscope. The erosion rate was calculated by weight loss method. The results
shows that the microstructure of the coating is compact and the carbide particles were evenly distributed. The
hardness ranges from 760 HV to 930 HV. At 210 m/s, the erosion rate of NiCr-Cr3C2 coating is only 0.1292%,
which is about 1/6 of that of the substrate; The erosion rate of NiCr-Cr3C2 coating is 3.3165% at 300 m/s, which is
about 1/2 of that of heat-resistant steel substrate. The coatings show mixed erosion mechanism of brittle material
and ductile material. The matrix material shows typical erosion mechanism of ductile material. NiCr-Cr3C2
coatings prepared by HVOF process exhibit excellent erosion resistance to solid particles.
keywords: Heat resistant steel Cermet coating Solid particle erosion Erosion rate Erosion morphology
文章编号: 中图分类号:TG174.4 文献标志码:
基金项目:
作者 | 单位 |
郭显平 | 西南石油大学 ,东方汽轮机有限公司 长寿命高温材料国家重点实验室 |
曹晓英 | 东方汽轮机有限公司 长寿命高温材料国家重点实验室 |
王伟 | 东方汽轮机有限公司 长寿命高温材料国家重点实验室 |
李定骏 | 东方汽轮机有限公司 长寿命高温材料国家重点实验室 |
王斌 | 西南石油大学 |
叶洋程 | 西南石油大学 |
引用文本:
郭显平,曹晓英,王伟,李定骏,王斌,叶洋程.超音速火焰喷涂制备 NiCr-Cr3C2 涂层 防固体颗粒冲蚀性能研究[J].热喷涂技术,2021,13(3):41-47.
郭显平,曹晓英,王伟,李定骏,王斌,叶洋程.超音速火焰喷涂制备 NiCr-Cr3C2 涂层 防固体颗粒冲蚀性能研究[J].热喷涂技术,2021,13(3):41-47.