本文已被:浏览 246次 下载 309次
中文摘要: 采用激光熔覆技术在高锰钢基材上制备了不同 TiC 含量的 Fe 基复合涂层, 研究了 TiC 含量对熔覆层组分
和性能的影响。 试验结果表明, 熔覆层化学组分包含奥氏体、 M7C3 碳化物、 TiC 析出相和未熔 TiC 颗粒。 随着
TiC 含量的增加, 熔覆层硬度逐步增加, 耐磨性能先增加后降低。
Abstract:Fe-based composite coatings with different TiC content were prepared on high manganese steel
substrates by laser cladding technology. The effects of TiC content on the chemical composition and properties of
the cladding layer were studied. The results showed that the chemical composition of the cladding layer contains
austenite, M7C3 carbide, TiC precipitates and unmelted TiC particles. With the increase of TiC content, the
hardness of cladding layer gradually increased, while the wear resistance firstly increased followed by decreasing.
keywords: Laser cladding Fe-based composite coating Chemical composition Wear resistance performance
文章编号: 中图分类号:TG174.4 文献标志码:
基金项目:
作者 | 单位 |
陈星 | 矿冶科技集团有限公司;特种涂层材料与技术北京市重点试验室 |
尹健 | 北京飞机维修工程有限公司 |
皮自强 | 矿冶科技集团有限公司;特种涂层材料与技术北京市重点试验室 |
杜开平 | 矿冶科技集团有限公司;特种涂层材料与技术北京市重点试验室 |
郑兆然 | 矿冶科技集团有限公司;特种涂层材料与技术北京市重点试验室 |
引用文本:
陈星,尹健,皮自强,杜开平,郑兆然.TiC 含量对激光熔覆 Fe 基复合涂层组分和性能的影响[J].热喷涂技术,2021,13(4):35-41.
陈星,尹健,皮自强,杜开平,郑兆然.TiC 含量对激光熔覆 Fe 基复合涂层组分和性能的影响[J].热喷涂技术,2021,13(4):35-41.