路洋,闫泽,周正,王彦军,苗小锋,冀晓鹃,贺定勇,汪云程.Ni-20Al 丝材制备及涂层微结构特征研究[J].热喷涂技术,2022,14(3):64~73.
Ni-20Al 丝材制备及涂层微结构特征研究
Preparation of Ni-20Al Wire and Microstructural Characteristicof the Related Coatings
  
DOI:DOI 10.3969/j.issn.1674-7127.2022.03-008
中文关键词:  Ni-20Al 丝材  火焰喷涂  微观组织结构
英文关键词:Ni-20Al wire  Flame spraying  Microstructure
基金项目:
                       
作者单位
路洋 北京工业大学材料与制造学部
闫泽 中国航空制造技术研究院
周正 北京工业大学材料与制造学部
王彦军 矿冶科技集团有限公司
苗小锋 中国航发南方工业有限公司
冀晓鹃 矿冶科技集团有限公司
贺定勇 北京工业大学材料与制造学部
汪云程 中国航发南方工业有限公司
摘要点击次数: 29
全文下载次数: 33
中文摘要:
      开发了三种不同结构的 Ni-20Al 丝材, 对其火焰喷涂工艺性和涂层微结构特征等进行分析, 并与商用 Metco 405NS 丝材及所制备的涂层进行了对比。 结果表明, 丝材结构影响了火焰加热时热量由丝材表面向芯部的 传导, 导致丝材熔化状态产生显著差异, 进而决定了喷涂焰流的稳定性以及相关涂层组织的均匀性。 其中, 采用 轧制拉拔包丝技术制备的 Ni-20Al 丝材, 呈现出优异的喷涂工艺稳定性, 所制备的涂层组织均匀, 平均显微硬度 和结合强度分别可达 348.3 HV0.05、 62 MPa, 与 405NS 丝材制备涂层性能基本一致, 具备了较好的应用潜力。
英文摘要:
      Three kinds of Ni-20Al wire with different structures were developed. The flame spraying suitability of three wires and the microstructural characteristics of related coatings were investigated, in comparison with the commercial 405NS wire and coatings. The results showed that the structure of Ni-20Al wire affected the heat transfer within wires during flame spraying, leading to significant differences in the melting state of the wires, which determined the stability of spraying process and the uniformity and microstructure of the related coatings. Consequently, the Ni-20Al wire prepared by rolling-drawing process with solid Ni wire filled exhibited an excellent stability during spraying process. The as-deposited coating depicted uniform microstructure with an average microhardness of 348.3 HV0.05 and a bonding strength of 62 MPa, which were in accordance with the coatings prepared by spraying 405NS wire. Therefore, the developed Ni-20Al wire here presented a great potential in application.
查看全文  查看/发表评论  下载PDF阅读器
关闭