本文已被:浏览 165次 下载 178次
中文摘要: 在 GH4169 试片上通过热喷涂制备了 NiCrFeMo 涂层, 并进行了涂层显微组织、 显微硬度、 结合强度及弯
曲性能评价。 采用 JMatPro 软件对 NiCrFeMo 涂层热力学性能进行了模拟计算, 并与 GH4169 相关性能作对比,
分析了二者的匹配性。 基于试验结果以某型号修理航空发动机实体零件为载体, 开展了涂层再修复技术的工程化
验证。 结果表明: 热喷涂 NiCrFeMo 涂层与 GH4169 材料匹配性良好, 用于修复 GH4169 类零件十分可靠, 可满
足航空发动机修理需求。
中文关键词: 热喷涂 GH4169 NiCrFeMo 涂层 再修复 航空发动机
Abstract:NiCrFeMo coating was prepared by thermal spraying on GH4169 test piece. The microstructure,
microhardness, bonding strength and bending property of the coatings was evaluated. The thermodynamic
performance of NiCrFeMo coating was simulated by the software of JMatPro, and then compared with the
performance of GH4169, to analyze the matching between them. Based on the test results, the engineering
verification of coating repair was carried out with the parts of an aeroengine. The results showed that the thermal
spraying NiCrFeMo coating matched with GH4169 material, and it was very reliable to repair GH4169 parts,
which could meet the requirements of aeroengine repair.
keywords: Thermal spraying GH4169 NiCrFeMo coatings Repair Aeroengine
文章编号: 中图分类号:TG174.4 文献标志码:
基金项目:
作者 | 单位 |
张眸睿 | 中国航发沈阳黎明航空发动机有限责任公司;北京航空航天大学航空发动机学院 |
李长银 | 中国航发沈阳黎明航空发动机有限责任公司 |
王奇峰 | 中国航发沈阳黎明航空发动机有限责任公司 |
刘礼祥 | 中国航发沈阳黎明航空发动机有限责任公司 |
吕晶晶 | 中国航发沈阳黎明航空发动机有限责任公司 |
引用文本:
张眸睿,李长银,王奇峰,刘礼祥,吕晶晶.热喷涂 NiCrFeMo 涂层再修复技术 在航空发动机上的应用研究[J].热喷涂技术,2022,14(4):71-76.
张眸睿,李长银,王奇峰,刘礼祥,吕晶晶.热喷涂 NiCrFeMo 涂层再修复技术 在航空发动机上的应用研究[J].热喷涂技术,2022,14(4):71-76.